Your Cart is Empty!

Please Wait.....

PRECISION MAKING RULE 6" - INCRA (USA)

رقم الصنف: 061739

العلامة التجارية: Incra (USA)

3.750 KWD

غير متوفر حاليًا سجّل الدخول لإضافة المنتج إلى المفضلة

*الصور المعروضة لأغراض توضيحية فقط، وقد يختلف المنتج الفعلي قليلًا.
يتم التوصيل عادة خلال 1–2 يوم عمل بعد تأكيد الطلب. يرجى مراجعة سياسة التوصيل .

تفاصيل المنتج

Model : RULE150M
Incra micro-fine patented guide holes and slots at every 0.25mm, 0.5mm, 0.75mm or 1mm, from 0 to 150mm or 300mm. They also offer 0 to 50mm height marking slots on the end in millimeters
Incra micro-fine patented guide holes and slots at the outer edges of the t-rule's top and bottom are spaced every 1mm, whilst the four centre rows of holes are at 0.25mm increments
You can draw a short line at any mm spacing using the outside slots
By selecting the centre rows and twisting your mechanical pencil you can spot mark any measurement to a full mm or 0.25mm, 0.5mm, 0.75mm or 1mm, before reaching the next full mm - this gives these rules the best accuracy you can achieve when marking out
The end reference bar can be easily removed or slid to to the left or right hand side of the rule allowing marking out tight into a corner of a cabinet or joint. It is also great for marking precise lines parallel up to 150mm from an edge
The t-rule has an anodized aluminum fence keeping the ruler straight when marking out long lines

Incra Precision Marking Rule Incra Rule

تقييمات العملاء

لا توجد تقييمات حتى الآن

اكتب تقييمك

منتجات ذات صلة

تحتاج مساعدة؟