Please Wait.....

LOCTITE 641 BEARING FIT 50ML - LOCTITE (USA)

رقم الصنف: 310605

العلامة التجارية: Loctite (USA)

7.750 KWD

الكمية المتوفرة: 41

أضف إلى السلة سجّل الدخول لإضافة المنتج إلى المفضلة

*الصور المعروضة لأغراض توضيحية فقط، وقد يختلف المنتج الفعلي قليلًا.
يتم التوصيل عادة خلال 1–2 يوم عمل بعد تأكيد الطلب. يرجى مراجعة سياسة التوصيل .

تفاصيل المنتج

Model	Loctite 641
Technology	Acrylic
Chemical Type	Methacrylate ester
Appearance (uncured)	Yellow liquidLMS
Fluorescence	Negative
Components	One component - requires no mixing
Viscosity	Medium
Cure	Anaerobic
Secondary Cure	Activator
Made	China

For best results, clean all surfaces (external and internal) with a LOCTITE® cleaning solvent and allow to dry.
If the material is an inactive metal or the cure speed is too slow, spray with Activator 7471™ or 7649™ and allow to dry.
For Slip Fitted Assemblies, apply adhesive around the leading edge of the pin and the inside of the collar and use a rotating motion during assembly to ensure good coverage.
For Press Fitted Assemblies, apply adhesive thoroughly to both bond surfaces and assemble at high press on rates.
For Shrink Fitted Assemblies the adhesive should be coated onto the pin, the collar should then be heated to create sufficient clearance for free assembly.
Parts should not be disturbed until sufficient handling strength is achieved.